JJC Square Lens Hoods For Fuji X-Series Lenses

002_DerekClarkPhoto-JJC-Square_Metal_Lens_hoods.jpg

If you're not a big fan of the supplied plastic lens hoods with some of the Fuji glass, you might be interested in the lower profile square ones available. I bought these ones by JJC on Amazon (U) for £28 each, which is less than half the cost of the Fuji versions. These hoods are metal and extremely well built. They fit on the lenses tightly so there's no chance of them coming off. They have flat covers on the front that slides over the lip at the front edge, which means your old lens caps can go straight in a drawer with the original hoods.

The JJC lens hoods are only available for the 16mm f1.4 and the 23mm f1.4, but the latter also fits on the 56mm f1.2 (as you see in the pictures here). Although the 90mm f2 has a 62mm filter thread like the 23 and the 56, the lens hood mount on the 90 is different so none of them fit that lens.

DerekClarkPhoto-JJC-Square_Metal_Lens_hoods-1.jpg

Unlike the original plastic hoods, the JJC square ones can't be reversed on the lens for storage. But these metal hoods are so small that I leave them on the lenses permanently. They fit all of my bags and have a smaller footprint than they would with the plastic hoods reversed. I'm not a fan of lens caps because they slow down the time it takes to remove my camera from the bag and shoot, so I tend to leave them off. But these flat JJC ones take up very little room in a pocket in my bag and are handy to stick on in dusty conditions.

 JJC name and model number can be placed at the bottom of the lens or the top (as shown here).

JJC name and model number can be placed at the bottom of the lens or the top (as shown here).